
Kinesis-RSS Techtips
The latest Techtips from Kinesis-RSS.
- How to properly install sample loops
Stainless SteelStainless steel sample loops are supplied with fittings that are unswaged onto the tube. It is important that the loop be completely bottomed in the injector port before the ferrule is ...
More - Avoiding Pressure Transients
Air in the sample loop can cause instantaneous system pressure drop that eventually returns to a normal level. Air causes the pressure to drop when the injector moves from the ...
More - How to properly install fittings
RheFlex® Stainless Steel (and titanium) A good square-cut, burr-free end on tubing is important for use in your system. The square-cut makes a flat surface for the tube to make co...
More - Sample Loop Loading
Partial-FillingUse the partial-filling method if you need to conserve sample or if you want to vary sample volume frequently. In partial-filling, the syringe sets the volume injected onto the column. ...
More - How to find and fix common leaks
Leaks cause valuable sample loss. Nobody wants that! The key to the valve holding pressure is the integrity of the sealing surfaces. If there is a scratch on the sealing surface or the needle seal in ...
More - How to use proper syringe needles
With front-loading injectors, it is important to use the correct needle when loading the sample loop. An incorrect needle will damage the valve and can cause poor reproducibility. When the needle is t...
More
